Important Aspects While Selecting Office Chairs

Purchasing office chairs for your office is a big task as you have to make sure that you choose the best for your employees to make them feel valued at your office. Good office chairs not only provide comfort but also increase the efficiency of your employees.

There are certain things that must be kept in mind in order to make the best deal.

Budget – making an estimate regarding how much you can spend on chairs is the most important thing. You must keep in mind the amount of money you can spend. There is a huge variety and a wide range in the prices of those chairs. There are various features that affect the price for example; the material used in the chair, the look, the comfort level and various uses of the chair (swivel with wheels attached to it helps you in reaching your entire operational area without getting up helping you save you energy from being waste in getting up again and again).

Type – office chairs are available in hundred of types like swivel, ergonomic, hydraulic, task, conference room and guest chairs etc. You must keep in mind the kind of chair which is best suited for your usage and also fulfill all your requirements. It is useless to waste money on a swivel chair if your employee has a very compact operational area and does not even have to move much in its area therefore it is very essential to keep in mind the services a chair must provide since wasting money on an expensive chair at a place where it is not even required is not a sensible decision to make.

Health factors – the health of your employees should be the major consideration for you. in such cases you must take all the possible steps that you can to prevent them from falling sick. The chair you select must provide comfort to your neck, legs and back (especially the lower back) to prevent body ache or any other health issues. Healthy employees will not only be regular at work but will also increase the productivity for your company.

Color and design – the color of the chairs you select must be sober or else according the color scheme of your office as bright colored chairs in professional office will not leave a good impression on the visitors. Since there are various kinds of designs available in each type of chairs therefore you must be careful before placing an order as the design you select must not be very gaudy. The chairs you select must be simple but the comfort level should be high. Selecting a very trendy chair with a low comfort level might give your office a nice look but will decrease the productivity of your employees since they will not be comfortable while working.

There are various places from where you can purchase office furniture. Purchasing office furniture online assist you by giving a huge variety of office chairs to select from. A wide variety of chairs will help you make the best deal.


Source by Susan J Morris

The Modern Evolution of the Sofa

In choosing the perfect sofa, take inspiration from these master craftsmen whose influence can still be found in living rooms around the globe.

Thomas Chippendale

Thomas Chippendale was a mid-18th-century cabinet-maker and interior designer whose innovations spanned several styles including neoclassical, Gothic, and rococo. He is known for his book of elaborate furniture designs that include complicated arches and ribbons. Chairs and sofas inspired by the Chippendale patterns have exposed bases and legs that curve down to the floor and may be carved. The pieces are typically constructed with dark-stained mahogany or other highly esteemed types of wood. They are upholstered with fine fabrics.

Robert Adams

Robert Adams was a Scottish architect who, along with his brother James, developed neoclassical interior designs in the mid-to-late 18th century. Their focus was elaborate architecture and furniture pieces that were designed together and echoed the same structural and ornamental themes. Adams’ furniture is characterized by light pieces with simplified classical designs like carved columns and medallion embellishments.

John Henry Belter

John Henry Belter was originally a cabinet-maker from Germany who brought his knowledge of wood carving to other furnishings. His unique method of laminating thin layers of wood together and ornately carving them defined a generation of woodworkers in the mid-1800s. His trademark Victorian sofas have curvy, S-shaped backs whose exposed wood features elaborate designs of flowers, curlicues, fruit, and birds.

Gustav Stickley

Gustav Stickley opened his first furniture company in 1883. Within two decades, he became a leader in the American Craftsman movement, which itself took inspiration from the British Arts and Crafts Furniture trend. His simple designs, with straight lines and straight-forward joints, placed an equal emphasis on form and function. Stickley-inspired sofas have plenty of simple, exposed woodwork with clear stains and finishes that let the natural beauty of the wood show through.

George Hepplewhite

Hepplewhite is another mid-18th-century English cabinet-maker with an interior design book to his name. However, unlike the other craftsmen mentioned here, no known pieces of his work still exist today. In fact, there is very little historical evidence to suggest that he ever produced couches and chairs for sale. Still, the design hallmarks of his work, featuring elegant curling arms and backs with contrasting straight legs, are elements that regularly appear on household items today. One of his unique sofa designs features a curving, non-upholstered wooden back featuring inverted arches with narrow rungs between them and delicately-patterned upholstery on the seat.

Knoll Associates

Designs have continued to evolve in the twentieth century and beyond. Hans Knoll originally started the company in 1938, but upon his death, his wife Florence continued to design and manufacture modern furniture. Their sofas feature exposed cast-aluminum legs and monochromatic upholstery, occasionally with tufting. Modern sofa designs may incorporate unembellished wood, well-defined geometric shapes, and even hard polymer elements.

Thanks to the global marketplace, furniture customers have a wider-than-ever range of choices. From antique pieces crafted by the masters to mass-produced couches to customizable sectionals, and finally, customer-designed 3-D printed furniture, the sofa has come a long way in the intervening centuries.


Source by Andrew Stratton

Top 3 Dollar Movie Theaters In Denver

There are a large number of theaters in Denver. Unfortunately, movie ticket prices have skyrocketed over time so sometimes it’s nice to have a night out on the movies without selling off your firstborn. The traditional Denver dollar theaters are a nice solution to be able to have a movie date for 2 for under $20. Usually the "dollar" theaters show later run movies for as little as $2.50 for a matinee. There are only a few of these low cost theaters in the Denver Metro area. So where can a Denverite go to enjoy a cheap movie?

1. Elvis Cinemas Tiffany Plaza

Elvis Cinemas Tiffany Plaza, also known as Tiffany Plaza Movies 6 is located on Tamarac and East Hampden Ave. The movies are $2.50 to watch main stream popular movies during matinee and $3.50 during prime time. The movies aren’t the latest releases, however they are a month or two behind the latest releases. There isn’t stadium seating, as well as high end digital sound, so you won’t have the same movie experience as you would in the latest AMC theater joint. This theater also isn’t the cleanest out there and the ambient noise is a bit louder than your mainstream theaters, but it certainly is a cheap date night… especially if you sneak in your own snacks, however with the concession prices being so low, it really isn’t worth the effort.

2. Elvis Cinemas Littleton

This is an older theater located just off of Kipling and Bowles. Unlike the mainstream theaters, and you purchase your tickets at the concession stand along with your snacks, but the price for tickets and snacks is also very affordable. The price for tickets is $2.50 for a matinee and $3.50 for primetime. The concessions are very reasonable as well and for this theater, a night for 2 can easily be under $20.

The theater can be a bit on the unclean side as compared to your modern theaters. There isn’t stadium seating available as this is an older theater, so don’t sit behind a tall person.

3. Arvada Elvis Cinemas

If you are one who doesn’t need to see a movie on it’s debut night, you can go to Arvada and catch a movie at the Elvis Cinemas in Arvada (located on 64th and Sheridan). As with the other dollar theaters, this one doesn’t have stadium seating as well, however this theater is relatively clean. The concessions are more reasonably priced than what you would find in the larger theaters as well, so a night out for 2 could end up being $15 including concessions. Tickets at this theater cost $2.50 for a matinee and $3.50 for prime time, which is the same as the other 2 theaters.

As you can see, the concept of the Denver dollar theater has really turned into $2.50 theater due to inflation, but compared to the $10.50 you pay for a movie ticket, you will certainly save a lot money for a movie night out. Even the price of the concessions at these theaters is much cheaper than what you would be charged at the regular theaters. Most of the movies that play at these theaters have already been playing for a couple of months are are being removed from the main stream theater circuit, but have not been released onto DVD yet. So to enjoy an inexpensive night out at the movies in Denver, these theaters are a great solution.


Source by B Hopkins

Home Decor Tips For Your Living Room

The living room is a very important part of the house. It is where you entertain your guests and also where you spend much time bonding with your family. Here are some great home decor touches to lend to your living room space:

Theme: Pick a theme you like. Traditional, Asian, cartoon, something you, at the very least, don’t mind looking at everyday. Themes like relaxation, desert, sea, and others make good themes for a living room.

Focal Point: The focal point should be the ‘first thing’ you see when entering a room. Build the focal point around a great lamp or an eye-catching piece of furniture.

Colour: The colours you choose will affect how guests feel in the space. Colours can energize or relax the space, depending on how intense they are and how warm or cool they are. For example, find a rug that really ties the room together and balance the colours in the room.

Furniture and Layout: Living rooms are gathering spaces, so use furniture arrangement to promote conversation and interaction. Keep in mind the scale and dimension of the room when choosing furniture, so that the pieces fit comfortably in the space. You need to also consider the layout, the size in terms of proportion to your living room and the number of people you want to fit in the area.

Windows: Drapery can make all the difference to a room, provide elegance and opulence. They also help provide a soft warm environment as well as creating colour, pattern and texture for your home decor. For understated elegance, you might consider going bare.

Finish the Walls and Ceilings: Traditionally, living room walls receive more elaborate or formal treatment than other rooms because the room is a public space. To make it a welcoming room that expresses your personality, choose wall-coverings or treatments that reflect your style.

Add Character with Architectural Trimwork: When doing renovation for your living room, keep in mind that trimwork serves practical purposes, covering the seams where floors and ceilings meet walls and supporting the structure around openings.These elements serve aesthetic purposes too. The style of trimwork helps give your home a distinctive look, whether classical, contemporary, old-world, or regional. Projecting lintels over the door and windows, a deep cornice, and a paneled and beamed vaulted ceiling combine to give this white-washed living room a sense of peace.

Choose the Right Flooring: In keeping with the function of the living room as a public space, choose a floor covering that provides comfort underfoot and makes a design statement as well. This vibrant wall-to-wall carpet lays the foundation for a refined mix of florals and stripes. If you prefer a less bold floor, choose a solid neutral flooring that allows attention to focus on furniture or art. Hardwood floors with area rugs are one of the most popular choices for living room floors, but ceramic tile, stone tile and full carpeting work too.

Accessorize with Art Collections: Walls come alive when you use them to display art or collections that you love. The most common mistake in hanging pictures is putting them too high.Group items for impact, and hang them low enough to relate to nearby furnishings or architecture.


Source by Eileen Chia

Dining Chairs – Pull Up a Seat and Enjoy a Good Meal

[ad_1]

Dining chairs can go from the surprisingly cheap to the ridiculously expensive. Your only constraints may be your existing dining room furniture, your budget…. and perhaps your environmental conscience. Let me explain. Your dining chairs are an opportunity to choose furniture that is made from sustainable wood and with non-harmful products. Sustainable hardwoods like oak, cherry and maple make a good base, and even better when the production process excludes any chemicals that might vaporize overtime and pollute the air in your dining room.

Interestingly, if you have a dining room table that is not too outlandish, you’ll probably find chairs to meet the criteria above and that still look good in your dining room. Sleek, contemporary designs using natural materials can go very well with glass top tables or tables made principally of metal. And of course, dining chairs can be both “green” and durable at the same time. No one says that you have to sit on chairs made out of cardboard or recycled soda pop bottles.

Naturally, if your budget extends to it, you can always partake in another form of recycling which is to buy antique chairs. Whether or not you choose to use them to seat your guests is another matter. It’s true that purchasing those hand-built, eighteenth century master craftsman dining chairs makes you a little wary of using them for guests who might not appreciate their full value.

Another option is open to you as well. If your current set of dining chairs are looking a little worse for wear, then you can still get a little bit more useful life out of them by using seat covers. As seat covers can be relatively inexpensive, you can even treat yourself to “new” sets of chairs for every day of the week!

However, there comes a time when even the best recycling tips and tricks will no longer save a set of chairs whose time has come. It might be the right moment to overhaul the whole of your dining room furniture, from chairs to sideboard to table. Depending on what you have and what you want your dining room to look like, you may well find that a new ensemble of dining room furniture breathes a whole new life into the dining experience.

One of the basic choices that you will have to make in that case is whether to buy chairs with arms or without. It’s a question of space, mobility and whether or not you and your guests at the dinner table would like to lounge around in your seats. Having arms on dining chairs also makes it easier to move the chairs around if you want to continue the conversation away from the table. On the other hand you would probably be well advised to acquire chairs for your dining room which do not require too much cleaning or maintenance, and that are protected against the stains that will inevitably result in area where food is commonplace.

[ad_2]
Source by Jennifer Akre

Furniture Sets for Creative Living Room Interiors

Video Upload Date: 2017-11-27 20:13:00
Video Duration:
Video Likes: [vid_likes]
Video DisLikes: [vid_dislikes]
Total Views:
Rating:

This video is a photo slide about design .PHOTO IS FROM INTERNET.If you are an owner of photo please contact me for tag you or if you wish to delete. Kaban …
source